Tumbledown Mountain Weld, ME

 
 

Tumbledown Mountain found in Weld, ME, located just outside of Mt. Blue State Park, approximately 2 hours North of Portland, has become on of the state’s most popular hikes. While not one of the tallest mountains in the region, this little mountain, with an elevation of 3068′, packs a punch, but rewards you with one of the prettiest views and a great alpine pond to cool down in as a reward.

Rules sign at entranceConservatory Sign at entrance

Open 24 hrs as you can camp out here overnight, outhouse located at the Brook Trail trail head, carry in carry out, dog friendly, hiking, camping, conservation, wildlife, bird watching, fishing, alpine pond, swimming.

For more information: http://www.tumbledown.org/

Scott, Derby and Scooby at bottom of trailTrail and Blaze

To Get There: (directions from Summitpost.org) From Portland, Maine, take I-95 north to Route 4 in Auburn. Follow route 4 through Auburn, Turner, Livermore Falls, and Jay. Turn left on 156 and follow into Weld Village. At the four way stop in Weld, go straight. Turn left at Webb Corner (large sign). Within about 1/2 mile, a logging road (Byron Road) leaves straight ahead in a 90 degree turn. The Brook Trail leaves Byron Road approximately 4.4 miles from Webb Corner. The Loop Trail also begins on Byron Road approximately 5.8 miles from Webb Corner. Both the Loop and Brook Trail heads are fairly well marked but I suggest setting your trip odometer when you make the turn at Webb Corner so you know you are in the general area.

* We mis-read our directions and found our Maine Gazetteer essential to finding our way back.

On our hike, we chose the Brook Trail as my husband had hiked this mountain before and remembered on the Loop Trail and Ridge Trail that there were places with ladder rungs to help hikers, as well as a hole on the Loop Trail that you would need to take your pack off to get through called the “fat man’s misery”. Since those trails would not be appropriate for our dog, we decided on the “easier” trail. The Brook Trail is approximately 1.5 – 2.5 miles (depending on which site you are looking at) with a 1, 600 ft height gain. Don’t be fooled though. The beginning of the trail is loose rock of various sizes on a wide path with many water barriers across the trail directing the water to the sides. Approximately 3/4 – 1 mile in, the path suddenly goes almost completely vertical. You will need to climb over many boulders and cross the stream 3 times. There is a rock step stair that parallels the waterfall near the top. The alpine pond is beautiful and the view can’t be beat.

Derby at top of TumbledownDerby at Tumbledown Pond

Notes: We went up on a Saturday in July 2008. We found the trail head to be packed and had to park along the side of the road with many others. There was a constant wave of hikers, fishers, campers and dogs going up and down the mountain. The beginning of the trail was easy packed rock, which changed as the elevation changed to loose rocks of various sizes and there was almost a shallow river running through the trail. There were work crews there working on the water diverts in the trail. As the trail elevation climbed more vertically, we found that even the dogs had some trouble climbing and eventually allowed them off-leash as many others were doing. This is not a beginner’s climb. I became overheated and eventually sick and had to rest often. It took us almost 3 hrs to reach the top, although we were passed by more fit hikers. The alpine pond at the top was a pleasant cool down on a hot and humid day for me as well as the dogs and was a very popular spot for many to have lunch. The climb back down was confusing at times as we lost the blazes 4 times. It was easy to back track though and get on the right path. The climb down was almost scary for me as I am a little afraid of heights and looking down at what I had climbed up was a bit daunting. I began to understand how the mountain got it’s name.

Have you been here? If so, what were your thoughts about this hike? Or did you take a different trail? If so, I would love to hear about it. Please post a comment and let me know about your experience.


The Perfect Small Stream Fly Rod

 
 

Small Stream Fly Fishing

Fly fishing for native trout on a small stream in the back county can lead to one of the most rewarding experiences of a lifetime. Getting off the beaten path to find finicky fish in untouched waters is what the pioneers of the sport truly intended. On the other hand, some small streams are just off the roadway but are just as willing, or unwilling, to give up their inhabitants to the skilled angler. The proper clothing, flies and equipment can help you make the absolute most of your adventure. The fly rod may be the most important aspect of your small stream set up.

One question that I often hear is, “what is the perfect small stream fly rod”. Well, allow me to clear this up right now… there is no perfect small stream fly rod. There, now you have it. I should stop here and leave it at that, but you know that I won’t.

Be careful, there are many self proclaimed fly fishing experts that are all too eager to give their opinion on the ideal rod for the smaller streams. Don’t be too hasty to accept their remarks as gospel and run out and buy a rod simply base on their opinions. I wish I could give you a cut and dried, etched in stone, answer and identify the specific rod that would be perfect for any small stream you may encounter in your fly fishing lifetime… but I can’t do that. Neither can anyone else.

Most folks simply do not realize the factors involved in making a small stream rod selection. There are several things to carefully ponder before dropping the bucks for a new rod. That’s exactly what we’re going to do here. We’ll discuss several important rod and stream factors that govern a small stream rod selection. After arming yourself with the proper information, it is you who will end up making the ultimate decision as to which rod is best for you.

What’s a Small Stream?

First things first… we probably need to identify exactly what constitutes a small stream. So, what type of water will you be fishing? Is it a small stream, a spring creek or a narrow river? Are all three of these really the same thing? All fly fishers are not on the same page here.

OK, look up “small stream” in the dictionary. What do you find? Nothing, right? There is no formal definition of this term. I know what I mean when I say “small stream”. But do you see in your mind the same thing that I see? Maybe, maybe not.

The Cimarron River in, New Mexico is no doubt a narrow river but don’t let the word “river” fool you. It consists mostly of small stream attributes. Most of the public water is lined with willows, cottonwoods and alders and provides anglers with undercut banks, riffles, runs, bend pools and pocket water. I fish this river as a small stream. The St. Vrain River in Colorado is another great example. There is no place on its banks where you can’t comfortably roll cast to the other side. When the water is clear, there is no place where you can’t see the bottom. On the other hand, Young’s Creek in Montana is about the same size and in some areas it is much wider than many stretches of the Cimarron and St. Vrain Rivers. I fish all three basically the same way.

Let’s just say that a small stream is one that you can cast across easily just about anywhere on it, that you can wade, often cross in hip boots, that is way too small for boats, and has most of its structure exposed to view. Also, most importantly, we’ll assume it has trout in it.

Back to the Rods

So now, what about the rod and stream factors? I will break things down by discussing each factor. As you study these bits of information, you should begin to develop a picture, in your mind, of what type of small stream fishing you’ll be doing and what rod you’ll be needing. You may find that, for you, one rod simply won’t get the job done. You may discover that you need two or more rods to satisfy your small stream desires. How bad could that be? You have now given yourself an excuse, and hopefully permission, to buy more rods.

Our rod selection factors include weight, length, action, material, sections, color and several stream characteristics. We must also spend a little time on fly lines because this may also impact our rod choice. Also, there is no need to get fancy with a small stream rod. Terms such as modulus, IM whatever, titanium, and other high-tech sounding terms frequently make their way into the fly rod shopping process. The good news is that these are things that should not worry you during you selection process. You don’t need the X15 Super Modulated Ballistic Fly Rod designed to cast a quarter mile on any small stream. Let’s just keep it simple.

Rod Weight

Anything from a 0wt to 5wt will work well depending on the situation. The ultimate choice of the rod weight has a lot to do with the size fish you’ll be after. Many small streams only support small trout. Some streams, of course, have larger fish. I’ve caught some healthy 16 inchers in streams, like Bear Creek in Southwest Colorado, which you can almost jump across. Generally though, you’re probably looking at catching fish from 6 to 10 inches. You’ll get an occasional 12 incher and several Jack Fish. Oh… what’s a Jack Fish you ask? These are the fish, generally called fry, that are so small that when you set the hook you jack them up out of the water and they sail back over your head.

So, the fight of a small fish feels better to the angler if they’re using a lightweight fly rod such as a 2 wt. The 16 inchers will feel great on a 2 wt rod also but there are some distinct disadvantages with this scenario. One is that by the time you get the big fish landed, it may be exhausted to the point of no return and may soon die after its release. If you’re going to eat it then that is really mute point. Secondly, you run the risk of breaking your rod from the strain. If you’re deep in the wilderness fishing a delightful little stream, the last thing you need is for your stick to break.

Another thing to consider is hook set. The lighter weight flimsy fly rods offer you little help in setting the hook. I have a 1wt rod that is a joy to use. The problem is that I lose a good amount of fish within two seconds of the hook set (or lack there of). If you’re using this type of rod you had best make sure your fly hooks are debarbed and honed needle sharp. I can use my 2wt with little problems of getting the hook set properly.

I am a 2 and 3wt fan when it comes to small stream rods. I like the lightweight feel of these rods. I like to feel the fish fight. For me, there lighter weight rods allows me to present a fly more delicately. The play in the rods offers me some leader protection on days when I must use very fine tippets. Unfortunately, I don’t catch many behemoths on the small streams that I frequent, so over fighting the fish is usually not a problem.

Castibilty is another issue with rod weights. A 5wt rod is much easier to cast than a 1wt rod… period. So, for the beginner, I would not recommend and extremely light weight rod. Perhaps a 4wt would be a better choice at this stage of skill level. But then, on the other hand, many small streams are so small that you’re really not casting anyway. You’re only flipping and dapping with an occasional roll cast. If you look at it that way, first class casting skills are not overly important. It depends upon the size of the stream, brush, trees and even wind as to how much real casting you may or may not be doing. For example, a typical small meandering stream that snakes through a valley meadow will likely have no trees and minimum brush to contend with. However, the wind may create a problem when trying to cast a 2wt. You may actually need a 4 or 5 wt in order get the fly where you want it.

You can see that when it comes to the ideal rod weight for small streams opinions vary. One single rod weight is not going to be ideal for every small stream application. I will venture to say that most of the anglers that I know use a 3 or 4wt rod in this situation. These are good all-around rod weights that will handle a large variety of small stream applications.

Rod Length

My very first small stream fly rod was a 2/3 wt, 7ft rod. I once took a fishing trip to the Cimarron River where I booked Doc Thompson of High Country Anglers. We fished the Cita which is a private stretch of the Cimarron just bellow the Cimarron Canyon State Park entrance. This section is a classic small stream just loaded with hungry Browns. I met Doc at the trail and started to assemble my gear. He patiently watched as I assemble my 7ft rod. He then calmly said, “Why don’t you leave that rod here, we’ll take my 9ft 4wt instead”. I was bit confused and my feelings were a little hurt. I was taught that you need a short rod for small streams and this is definitely a small stream. However, I figured he was the expert on this river so I’ll take his word for it. We were soon on the bank and Doc pointed out a nice pool to cast to. After I made a few drifts, he said, “Here, let me see your rod for a minute”. He then taught me how to properly high stick. I then saw the advantages of a long rod on a small stream. Doc had me to cast out with only about 1 or 2 feet of fly line hanging out of the end my rod. He then had me lift the rod high while keeping it parallel to the ground. I was trying to keep all of the fly line and as much of the leader as I could off of the water. This was creating, of course, a perfectly drag free drift. Occasionally I was able to lift the entire leader from the water so that the only thing touching the water was my dry fly. This took a lot practice but I finally got the technique down pat and caught a lot of fish. I made very few overhead casts. I mostly flipped and rolled so the brush and trees were really not much of a problem.

Rod length is a very important consideration and, in some situations, maybe even more important than rod weight. As you can see, there is more than one school of thought regarding the proper rod length for small streams. The short rod advocates are steadfast in their beliefs. The long rod proponents are equally convinced there technique is superior. I can see that both rods have their place. This is where the character of the stream itself will help you in determining the best length for you in a given situation.

Shorter rods, 5 to 7ft, may be ideal for the tightest and brushiest of creeks. Best of all, these short rods are so cute and so sweet. On the opposite side we may find the need for that long rod. An 8’6”, a 9ft, or perhaps even longer rod may be the best choice for the meadow stream that offers little casting impediments. Maybe you’ll be high sticking to finicky trout and you need that extra reach. The Global dorbeR Group in Flippin, Arkansas now produces a 10ft 1wt fly rod blank for this type of fishing.

Rod Action

If your time is going to be spent chasing Brookies s on a smaller stream, then a fast action may not be the best choice. Medium and slow action rods are better suited for small streams. They offer better control, more accuracy, more tippet protection and softer presentations. I know there are some fast action fanatics out there and that’s fine. If a fast action rod feels good to you, then by all means use it. Myself, I prefer a medium action rod. The medium action just feels good to me. They offer more forgiveness of my sometimes lazy casting stroke. They really do offer the accuracy and the delicate presentations that I often need on these small creeks. The medium action rod slightly out performs the slow action in the hook set, yet the slow action remains another great choice for fishing for small fish.

Material

I suppose our basic choices here are bamboo, fiberglass and graphite. Most rods sold today are graphite. Overwhelmingly so. Graphite rods are lighter in weight, more sensitive, and have a faster response than a bamboo or fiberglass rod. More than likely you’ll end up with a graphite rod and your decision to do so will be sound and safe.

It is important though to not overlook fiberglass and bamboo. With glass and bamboo, you have a solid structure consisting of fibers with varying densities. With graphite you have a hollow tube of uniformmaterial. The result is that glass and bamboo is smoother, closer to natural action and a little less tiring.

You may hear that bamboo rods are heavier. This is true, however, this relatively small increase in weight is also one of its advantages, for this additional weight gives these rods an inherent loading characteristic that makes them very smooth casting. Split bamboo rods are also a fly fishing work of art. They certainly have an aesthetic advantage over glass and graphite. One problem is that they’re usually quite expensive.

Glass rods may be a better alternative to bamboo. Doug Macnair, long time casting instructor and fly fishing writer, says “In the short rod format, fiberglass handles very much like bamboo and in my opinion beats graphite every time. I would suppose that my all time small stream favorite is the Little Betts fiberglass 6-footer from 1963.” You’ll probably not find many 1963 Little Betts around but you can still get good fiberglass rods today. Diamondback’s Diamondglass rods are a perfect example of modern fiberglass fly rods at their best.

Sections

I have a 7pc 3wt fly rod that packs down into an 18” rod tube. I thought it would make a great small stream rod because it disassembled into such a concealed package. I could store it anywhere. The last time I used it I was with a friend who had a 2pc rod. We drove up to only a few yards from the creek. We started rigging up for the fish. In a matter of what seemed like seconds, my friend was catching fish while I was still assembling my fly rod.

So, how many sections should your new small stream rod break into? It is a matter of preference as well as functionality. A 2pc rod is so convenient. You only have two sections to worry about. Aligning the guides during assembly is so simple. A 7 or 8pc rod is also convenient in its own way. Their tubes are very short which makes for a great travel or pack rod. If you are hiking or backpacking any significant distance to the back country stream then these rods are ideal. It just takes a little longer to assemble them in a manner so that the guides are all lined up. It’s probably safe to say that the largest selling rods come in 4 sections.

It’s a good idea to consider how you will usually be traveling to you fly fishing destination. Will you fly or drive? If you fly, well, that opens up a whole other can of worms. We’re not talking San Juan worms either. This can get pretty nasty sometimes. Generally there is no problem flying with a four piece rod, without reel, as carry on. But like a lot of carry on rules today, a lot depends on who is working the security check point at the time you pass through. Trying to carry on a reel is a big no-no today. Airline officials have said there is enough fly line and backing to tie up a whole flight crew. The thing to remember is that the enforcement and interpretation of these rules are very inconsistent.

One very good solution is to purchase one of the new rolling duffels that have a dedicated space in the bottom to hold several four piece rod tubes and check it as luggage. Fishpond, Orvis and Cabela’s have luggage with this feature. Just check the luggage and hope for the best. It should arrive safely. On the other hand, if you try to carry it on and get stopped at the terminal and are requested to check your fly rod tube, the chances of never seeing your rod again have just increased

One other solution is to FedEx or UPS your equipment to the lodge or hotel ahead of your arrival and arrange for a prepaid pick up after you leave. This also offers better insurance coverage than hassling with an airline if something is lost.

Fly Line

Now that I have enlightened you on some factors and characteristics to strongly consider when purchasing your new fly rod I am finished, right? Well, in all good conscience, I can’t just turn you loose right now without at least mentioning fly line and how it will affect your small stream rod.

First of all, let me make this perfectly clear, I usually advocate staying with the manufacturer’s suggested line recommendations or, in the case of the heavier weights 6-9, underlining by one weight depending on the circumstances. Wait a minute… did I say underline? Yes I did. Macnair opened my eyes to this concept. You see, it’s in the amount of line you aerialize in making the cast. Consider for a moment that while you and I now know the weight in grains for the first 30-feet of our line, we don’t know the weight of the remainder that typically includes the rest of the head, its rear taper, and the running line … An interesting thought? It should be, because for every ten to fifteen feet we add to the initial 30 hanging in the air, we effectively add another line weight to the load carried by the rod. Said another way: a 5-weight line becomes the equivalent of a 6-weight when 40-feet of line are aerialized, a 7-weight with 60 to 65-feet in the air, etc. At some point, of course, our 5-weight rod will overload resulting in either a collapsed cast or worse, a broken rod. Then, as Doug would say, the Ancient Fishing Gods will be laughing.

OK, so what does this concept of underling a 7wt fly rod have with a small stream rod? Plenty… the same concept applies but in reverse. Let’s say you’re using a 3wt rod with a 3wt line on a small stream. Most of your casts are going to be less than 15 or 20 feet. Take away the leader and you only have about 10 feet or so of fly line aerialized. Well that’s not enough line weight to allow the rod to perform as designed. So, in this case, its makes perfect since to overline your rod. Ten feet of a 4wt line might give you enough aerialized weight to allow the rod to perform better and thus improve your casting. So think about it. You may want to overline your new rod depending on how far you think you’ll be casting.

Conclusion

OK… there you have it. Now, have I covered every possible aspect of selecting the ideal creek rod? Probably not… but you know have enough information to assist you in selecting the best stick for your specific applications. I think you now realize that no single rod will do.

This article is courtesy of Steve Robbins. Steve is the owner of The Full Creel Fly Shop at http://www.thefullcreel.com & http://www.ebayflyshop.com He is also the owner of Aztec Anglers at http://www.aztecanglers.com… the premier guide service for fly fishing the San Juan River in New Mexico.

Article Source: http://EzineArticles.com/?expert=Steve_Robbins

It’s Time To Get Ready For Spring Fishing in Maine

 
 

Here comes March! This is usually the time when I wrap up my ice fishing. It’s time to think about getting ready for spring fishing. Do you need new line? Maybe you need a new pole or reel? The sales usually start during this month for all of the gear you need. Maybe you would like to find someplace new. Pick a place you haven’t tried yet and plan a weekend trip to check it out.

My brothers and friends and I use the winter months to plan on a new trip for spring. This year we are going to devote a few days to brooks for that elusive trout. I found a couple while in the backwoods looking for new deer sign. Can’t wait to flip a fly in them and see what is there.

See you on the water!

Time to Clean out Your Tackle Box

Meanwhile we might as well get the old tackle box out and give it a good cleaning. The first thing to do is through away all the junk (old line and candy wrappers).

Now let’s get serious. What is your primary target this year? I use two tackle kits, a box for boat fishing and a shoulder bag for canoe and stream fishing. This allows me to carry a lighter load and eliminate gear that I don’t need.

It’s also a good way to weed out gear you don’t really need. A good hook sharpener comes in handy in most any kit. Keep one handy at all times. There’s no sense losing a fish to a dull hook.

The next thing you should look at is the condition of your lures. Are they rubbed or scratched? Touch up paint or even fingernail polish (check with your wife or daughters first) will do the trick. Brush on little sealer after they are dry and you’re all set for another year. You might want to check the trebles at this time. Now is the time to replace bent and rusty hooks.

When you get to those plastics, whether tubes or worms, be sure to take out any that have begun to stick to the box. They will definitely cause you trouble later on.

I’m tired just writing about it. Think I’ll go take a beer break! See you on the water.

Ron Shannon is a Reg. Maine guide from Clinton, Me. USA. He has been camping for over thirty years, using camp as a base for fishing, canoing and hunting trips. Though he now uses a travel trailer, he has amassed his knowledge from tents to trailers through years of trial and error. His camps have ranged from camping alone to as many as twenty people.

Copyright Ron Shannon

You can find info on writing your own articles at our web site: http://shannonsenterprises.com
Contact: rbsarticles@verizon.net

Article Source: http://EzineArticles.com/?expert=Ronald_B._Shannon

The History of Fishing in Maine

 
 

By Ronald Moody

Fishing has played an important part in Maine’s rich and varied history from as early as the 19th century. Alongside mining, lumbering and shipbuilding, commercial fishing played an important role in the economic development of Maine, which remained one of the areas most popular industries for several decades. However, developments in the mining and manufacturing industries saw a decline of Maine’s fishing industry. Fortunately, smaller communities living on and around Maine’s numerous rivers and lakes ensured that fishing would remain part of the areas heritage and become the hugely popular tourist attraction that it is today.

Following on from this foundation, Maine now bases much of its economy on the tourism industry. Though Maine has many attractions, not least of all its lush areas of natural beauty, the fishing locations on offer are arguably the premier attraction for visitors from around the globe. As a result of Maine’s unique mix of freshwater and saltwater fishing locations, countless fishing communities are continuing to thrive on the back of keen enthusiasts and professional anglers alike.

Maine is also home to more than its fair share of fishing heritage, including that of Cornilia Crosby, or “Fly Rod” as she was affectionately known. Brook Trout, Maine’s Native Arctic CharCornilia had the honour of being the first person to be awarded with a Guiding License in 1897 having spent years learning the woods, lakes and rivers of Maine. As the nickname would suggest, Cornilia was a keen angler who became highly skilled at fly-fishing. One story in particular claims that Cornilia landed 200 trout in a single day.

Cornilia began journaling her fishing expeditions and submitted them to numerous publishers and editors under her nickname of “Fly Rod”. Such a hit were her tales that “Fly Rod’s Notebook” became a hugely popular column in newspapers in New York, Boston and Chicago, and no doubt attracted hundreds of keen fisherman from around the country to the rivers and lakes of Maine.

Fortunately for the people of Maine, the lakes and rivers remain some of the best fishing locations in the world, and countless fishing resorts continue to prosper on the back of superb scenery, big fish and warm, friendly communities. With well over a hundred years of fishing heritage, Maine continues to make history as one of the world’s premier recreational fishing locations.

Ronald Moody has been an avid fisherman for over 40 years. He enjoys all types of fishing, but especially likes salt-water fishing; he has been all over the country practicing his hobby. He is the owner and operator of http://www.fishingzoo.com, a website dedicated to inform fisherman about Maine fishing, fishing locations, and fish supply products. Visitors are welcome to copy and paste this article on their website as long as the following information is sourced: Maine Fishing by Ronald Moody

Article Source: http://EzineArticles.com/?expert=Ronald_Moody

Vermont Days, June 9 & 10

 
 

From www.vtfishandwildlife.com:

Here’s a reminder to mark Saturday and Sunday, June 9 and 10, on your calendar as ‘Vermont Days’ for 2007. This is the weekend to celebrate the arrival of summer and enjoy a free sample of Vermont’s excellent fishing, state parks and historic and cultural resources. All Vermont State Park day areas, state-owned historic sites, and the Vermont Historical Society Museum will be open at no charge.

“June 9 is Vermont’s ‘Free Fishing Day’ — the one day in the year when residents and nonresidents may go fishing without having to purchase a fishing license” said Wayne Laroche, Commissioner of the Vermont Fish & Wildlife Department. “It’s a great opportunity to take the family fishing and create memories to last a lifetime.”

“Fishing Festivals’ will be held between 10:00 a.m. and 3:00 p.m. on the 9h at the Ed Weed Fish Culture Station in Grand Isle and the Bennington Fish Culture Station in Bennington. Designed especially for youngsters, these events offer instruction on basic fishing techniques, but they also are a unique opportunity for kids to catch trout in a pond on the property.

Vermont’s 284 lakes and over 7,000 miles of clear streams offer the greatest variety of high quality fresh water fishing in the Northeast. Contact the Vermont Fish & Wildlife Department, 103 South Main Street, Waterbury, VT 05671-0501 (Tel. 802-241-3700) for a copy of their Fishing Guide Map to find out more about Vermont’s great fishing opportunities and to plan your fishing trip. You can also email them (fwinformation@state.vt.us) or discover more information from their website (www.vtfishandwildlife.com).

Vermont Days is a great chance to gather with family and friends and discover a new part of Vermont, or reconnect with a favorite place you haven’t visited in a while. This year more activities and special events have been added, including live music, Vermont dairy products, and artist demonstrations and performances — all at selected state parks and state-owned historic sites. Locations and events are open and free for everyone – both residents and nonresidents. Check for details on this weekend and for information on Vermont’s fishing, state parks, and historic sites at www.vermontdays.vermont.gov.

Vermont Days is a free statewide event celebrating Vermont’s natural resources, history, and talent brought to you by the Department of Forests, Parks & Recreation, Fish & Wildlife Department, Division of Historic Preservation, Department of Tourism & Marketing, Agency of Agriculture, Food & Markets, VT Arts Council, VT Information Centers, and many supportive state employees and volunteers.